THOMSON SpeedTouch 608, Cli Reference Manual

Page: 281 / 490

279
IPSec Commands
E-DOC-CTC-20040216-0002 v1.0
ipsec descriptor delete
Delete an IKE (Phase 1) and AH/ESP (Phase 2) security descriptor.
SYNTAX:
where:
RELATED COMMANDS:
ipsec descriptor delete name = <string>
phase = <{IKE|IPSEC|1|2|I|II}>
name The name of the security descriptor to delete.
Note
Use the command
ipsec descriptor list
for a listing of avail-
able security descriptors.
REQUIRED
phase Specifies whether an IKE (Phase 1) or AH/ESP (Phase 2) security
descriptor is deleted.
Specify:
•
IKE or 1 or I
For specifying an IKE (Phase 1) security descriptor.
•
IPSEC or 2 of II
For specifying an AH/ESP (Phase 2) security descriptor.
REQUIRED
ipsec descriptor add Add a security descriptor.
ipsec descriptor list Show a list of available security descriptors.