THOMSON SpeedTouch 608, Cli Reference Manual

Page: 253 / 490

251
IPSec Commands
E-DOC-CTC-20040216-0002 v1.0
ipsec cert clearall
Physically delete the secure storage of certificates currently installed on the SpeedTouch™.
Note
Use this command with extreme caution. Recovery of deleted certificates is NOT possible!
SYNTAX:
where:
EXAMPLE:
IMPORTANT NOTE:
To be absolutely sure that the secure storage is completely deleted from the SpeedTouch™'s file system, perform the
following actions:
1
Delete the passive SpeedTouch™ software:
2
Duplicate the current running active software as passive software version:
3
Switch over active and passive software version:
The SpeedTouch™ will restart. All certificates previously stored in the SpeedTouch™ file system subdirectories
/active
and
/dl
are deleted. The secure storage is cleared.
ipsec cert clearall [force = <{yes|no}>]
force If you are really sure to clear the secure storage, specify yes.
Note
If not specified, the secure storage is not deleted. A
warning message appears instead.
OPTIONAL
=>ipsec cert clearall
Removing the secure storage will effectively delete
all certificates currently installed on this gate.
There is
_no_ way to recover these certificates afterwards. If you are
really sure you want to do this, use the force option
=>
=>ipsec cert clearall force=yes
Secure storage security is guaranteed when executing following commands:
Delete the passive software (software deletepassive)
Duplicate the active software as the passive software (software duplicate)
Switch over active and passive software (software switch)
=>
=>software deletepassive
=>
=>software duplicate
=>
=>software switch
=>