manualshive.com logo in svg

THOMSON SpeedTouch 350, Setup And User Manual

The THOMSON SpeedTouch 350 Setup and User Manual is a comprehensive guide for users looking to set up and maximize the potential of their SpeedTouch 350. Easily download this essential manual free from manualshive.com to learn how to make the most of your THOMSON SpeedTouch 350's features and capabilities.

Share
Download
background image

1   SpeedTouch™ Installation

E-DOC-CTC-20031204-0011 v2.0

5

1 SpeedTouch™ Installation

Introduction

Thank you for purchasing a THOMSON SpeedTouch™ DSL product!
With the SpeedTouch™350(i) and SpeedTouch™360(i) Asymmetric Digital Subscriber 
Line (ADSL) Modems, surfing the Internet will become a whole new experience.

In this Setup and User's 

Guide

This Setup and User’s Guide will assist you in getting acquainted with the Speed-
Touch™350/360 and in getting connected quickly to the Internet.

Applicability

The document covers the following SpeedTouch™ products:

•

the SpeedTouch™350 ADSL/POTS modem

•

the SpeedTouch™350i ADSL/ISDN modem

•

the SpeedTouch™360 ADSL/POTS modem

•

the SpeedTouch™360i ADSL/ISDN modem

Note

You can easily identify your product by checking the identification label 
located on the bottom of your SpeedTouch™.

Terminology

Generally, the SpeedTouch™350(i) and SpeedTouch™360(i) will be referred to as 
SpeedTouch™ in this Setup and User's Guide unless specifically indicated. 

Safety instructions

Before connecting the SpeedTouch™, please read the SpeedTouch™ Quick Installation 
Guide en Safety Instructions.

Documentation and 

software updates

The SpeedTouch™ products continue to evolve as extra and new functionalities are 
made available.
For more information on the latest technological innovations, software upgrades, and 
documents, please visit the SpeedTouch™ web site at: 

www.speedtouch.com

.

Summary of Contents for SpeedTouch 350



























































Reviews:

No comments

Related manuals for SpeedTouch 350

9XTend-NEMA RS-232/485 Product Manual preview
RS-232/485
Brand: 9XTend-NEMA Pages: 66
ZyXEL Communications Prestige 650M-17 User Manual preview
Prestige 650M-17
Brand: ZyXEL Communications Pages: 89
Multitech MultiModem MTCBA?EV1?U1?N3 User Manual preview
MultiModem MTCBA?EV1?U1?N3
Brand: Multitech Pages: 24
Fargo Maestro 100 User Manual preview
Maestro 100
Brand: Fargo Pages: 17
CalAmp LandCell SMC-GPRS Series User Manual preview
LandCell SMC-GPRS Series
Brand: CalAmp Pages: 84
Palm Handbook Handbook preview
Handbook
Brand: Palm Pages: 20
3 Com U.S. Robotics ISDN Pro TA Installation Manual preview
ISDN Pro TA
Brand: 3 Com U.S. Robotics Pages: 1
Technicolor TC7200.20 User Manual preview
TC7200.20
Brand: Technicolor Pages: 85
Zhone 6411-A1-xxx Technical Specifications preview
6411-A1-xxx
Brand: Zhone Pages: 2
NETGEAR DG834GV Reference Manual preview
DG834GV
Brand: NETGEAR Pages: 106
Redlion IndustrialPro BT-6400 Quick Start Manual preview
IndustrialPro BT-6400
Brand: Redlion Pages: 2
Access RAD ASMi-54 Installation And Operation Manual preview
RAD ASMi-54
Brand: Access Pages: 126
3onedata 7301 User Manual preview
7301
Brand: 3onedata Pages: 5
O2 E173 User Manual preview
E173
Brand: O2 Pages: 24
Kanguru Defender 2000 User Manual preview
Defender 2000
Brand: Kanguru Pages: 40
TRENDnet AC750 TEW-816DRM Quick Installation Manual preview
AC750 TEW-816DRM
Brand: TRENDnet Pages: 15
A-Link 3GU Installation Manual preview
3GU
Brand: A-Link Pages: 83
HORNER CGM750 Product Specifications And Installation Data preview
CGM750
Brand: HORNER Pages: 8

Brands by name

Popular brands

Load more brands