THOMSON LDK 200, Technical Manual

Page: 18 / 68

2-8
Technical Manual LDK 200 - Camera Head Installation
Specifications LDK 200
Camera Head
General data
Power requirements triax powered or 12V dc
Power consumption 23 W (Head + VF)
Operating temperatures
-20 to +45°C (-4 to +113°F)
Storage temperatures
-20 to +60°C (-4 to +140°F)
Weight (approx.)
2.1 kg (2.2 lbs) incl. 1.5-inch VF
Triax cable length
2.400m (7,875 ft) max. with 16mm (0.63") cable
3000m with RGB long triax modification (optional)
Pick-up device
3 x 2/3-inch DPM Frame Transfer CCD's
aspect ratio switchable 4:3 and 16:9
Picture elements
NTSC: 1000(h) x 498(v)
PAL: 1000(h) x 594(v)
Digital quantization
12 bits A to D
Digital signal processing
18 MHz and 36 MHz, 24 bits accuracy
Sensitivity
2000 lux (186 ft cd) at F8.0 reflectance 89.9%
Minimum illumination
Approx. 2 lux at F 1.4 and +30 dB gain
Exposure control
Down to 1/1000
Clean scanning
NTSC: between 61.1 and 151.0 Hz
PAL: between 51.0 and 103.0 Hz
Optical system
F1.4 with quartz filter
Optical filters
Clear, 1/4 ND, 1/16 ND, 1/64 ND
Clear, 4-point star, 6-point star, soft focus
Modulation depth
70% at 5Mhz
65% at 5Mhz with Hires Digital Noise Slicer
S/N ratio
Typical: 61 dB PAL, 67 dB with HiRes Digital NoiseSlicer
Typical: 63 dB NTSC, 69 dB with HiRes Digital NoiseSlicer
Registration
<25 ns (0.05%) in all zones, without lens
Dynamic range
>600%
Gain
-6dB to +30dB in 3dB steps (user defined presets)
Viewfinder
Type
1.5-inch B/W
Resolution > 600 TV lines
Connectors
Front mic in. XLR 3, balanced, +48V
(CH1 on Base Station)
Control bus 9-pin, RS232 compatible
Viewfinder out 20-pin
Lens out 12-pin
Docking connector 160-pin
These typical specifications are valid for PAL and NTSC
systems and are subject to change without notice