THOMSON Grass Valley KAM-XM Series, Instruction Manual

Page: 11 / 80

KAM-XM-SERIES Instruction Manual 11
Quick Start Guide
Quick Start Guide
This Quick Start Guide is provided for an overview of installing the
KAM-XM modules. Each step gives you a link to a more detailed descrip-
tion of each process.
1.
Install the KAM-XM modules in the 2000 Kameleon frame. Install the
XM-IO-1 Rear module first, then install the front module in the
corresponding front slot (
Module Placement in the 2000 Frame on
page 12 ).
2.
Connect the 2000 frame to the network and navigate the web browser
to the frame. This process is described in detail in the 2000NET
Instruction Manual available on-line.
3. Navigate to the module you would like to configure and click on the
appropriate slot to access the module links (
Links and Web Pages on
page 38 ).
4.
Click on the Slot Config link on the left side of the page ( Slot Config Web
Page on page 65 ). This page allows you to assign a name to this module.
Assigning easily recognizable names will help later in the configuration
process.
5.
Cable the rear module signal connections ( Cabling on page 16 ).
6. Configure the input and output formats on the Format web page
(
Format Web Page on page 44 ).
7. Configure the Reference source on the Setup web page ( Setup Web Page
on page 42 ). Select the type of reference from either the input signal or
an external reference (2000GEN module installed in the 2000 frame).
8.
Continue with module configuration depending on the module type.