44
KAM-HD-MULTI—Instruction Manual
Kameleon HD Links and Web Pages
Signal Naming
Enter a signal name (up to 12 characters) for each operational
input/output. The name will be used to identify the signal in other config-
uration web pages. Factory default names for all models are shown on the
individual I/O web pages for each model. Use the Recall Factory Names
Defaults
button to return the signal names to factory defaults. This control is
also available on the E-MEM web page.
Status Boxes
As shown in the Legend at the bottom of the I/O Config web page, each
connector is monitored and status reported with the following color code:
•
Green = Pass – signal is present.
•
Yellow = Warning – signal is absent, has errors, or is misconfigured.
•
Light gray = connector is not monitored.
•
Dark gray = connector is unused.
Figure 20. KAM-HD-MULTI-UR I/O Config Web Page – 8 In/0 Out
