Lic
en
se T
ran
sfe
r
Transfer between a USB key and another
USB key
1
Click the "USB to USB" tab on the "EDIUSLM" dialog.
2
Select the license to transfer and click [->].
3
Remove the USB key, set the USB key to transfer the license
to, and then click [Refresh].
Notes
Make sure to remove the USB key where the license had been stored,
before setting the destination USB key.
When you change the USB keys, do not fail to click [Refresh] in order to
update the License list.
•
•
4
Select the license and click [<-] to transfer it to the new USB
key.
5
Wait until the license is transferred, and click [Close].
Notes
Do not remove the USB key when the licenses are being transferred.
To transfer licenses, make sure to replace USB keys step by step.
•
•
