THOMSON DV7213 Reference Manual Download Page 96

Page: 96 / 814

E-DOC-CTC-20061027-0009 v2.0

Chapter 4

config flush

Flush the loaded configuration.

SYNTAX:

where:

1. This flush command combines all the possible flush commands.
2. This command does not affect saved configurations.

config flush

[flush_ip = <{enabled | disabled}>]

flush_ip

Flush IP settings (enabled) or not (disabled).
The default is

enabled

Note

Not keeping the IP settings could cause lost IP connectivity in the
LAN.

OPTIONAL

Summary of Contents for DV7213














































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DV7213

Reviews:

THOMSON DV7213, Reference Manual, Page: 96 / 814

Search results

Summary of Contents for DV7213

Reviews: