manualshive.com logo in svg

THOMSON DV7213, Reference Manual, Page: 653 / 814

Share
Download
THOMSON DV7213 Reference Manual Download Page 653

E-DOC-CTC-20061027-0009 v2.0

Chapter 35

629

systemlog show

Show messages in the internal Syslog message buffer.

SYNTAX:

where:

systemlog show

[fac = <supported facility name>]
[sev = <supported severity name>]
[hist = <{disabled | enabled}>]

fac

Specify the facility name of the syslog messages to be shown.
Use one of the supported facility names (see 

“ Supported Facilities” 

on page 771

).

Note

If not specified, the messages of all the facilities will be 
shown.

OPTIONAL

sev

Specify the lowest priority severity of the syslog messages to be 
shown.
All the syslog messages with severity as specified or higher will be 
shown.
Use one of the supported severity names (see 

“ Supported 

Severities” on page 772

).

Note

If not specified, the messages of all the severities will be 
shown.

OPTIONAL

hist

Show messages over several Thomson ST reboots (enabled) or show 
only messages since latest startup (disabled).

Note

If not specified, only the recent messages will be shown.

OPTIONAL

Summary of Contents for DV7213















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments