THOMSON DV7213, Reference Manual, Page: 439 / 814

E-DOC-CTC-20061027-0009 v2.0
Chapter 21
415
ip ipadd
Assign an IP address to an IP interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ip ipadd intf = <string>
addr = <ip-address>
[netmask = <ip-mask(dotted or cidr)>]
[pointopoint = <ip-address>]
[addroute = <{disabled | enabled}>]
intf The IP interface name. REQUIRED
addr The new IP address to be added. REQUIRED
netmask The subnetmask associated with this address. OPTIONAL
pointopoi
nt The remote IP address in case of a dedicated point-to-point link. OPTIONAL
addroute Add typical net/subnet routes automatically according to the default (or
specified) subnet mask (enabled) or not (disabled).
The default is
disabled .
OPTIONAL
=>ip iplist
Interface
Type IP-address Point-to-point/Mask
1 eth0 Ethernet 10.0.0.138 255.255.255.0
1 eth0 Ethernet 169.254.141.11 255.255.0.0
0 loop Ethernet 127.0.0.1 255.0.0.0
=>ip ipadd intf=eth0 addr=10.0.0.2/24 addroute=enabled
=>ip iplist
Interface
Type IP-address Point-to-point/Mask
1 eth0 Ethernet 10.0.0.2 255.255.255.0
1 eth0 Ethernet 10.0.0.138 255.255.255.0
1 eth0 Ethernet 169.254.141.11 255.255.0.0
0 loop Ethernet 127.0.0.1 255.0.0.0
=>
ip ipdelete Remove an IP address from an IP interface.
ip iplist Display all the configured IP addresses.