THOMSON DV7213, Reference Manual, Page: 102 / 814

E-DOC-CTC-20061027-0009 v2.0
Chapter 5
78
connection appconfig
Configure the available CONN/NAT application helpers.
SYNTAX:
where:
connection appconfig application = <string>
[trace = <{disabled | enabled}>]
[timeout = <number{0-32000}>]
[floating = <{disabled | enabled}>]
[childqos = <{DSCP|Interactive|
Management|Video|VoIP|default}>]
[tracelevel = <number{1-4}>]
[SIP_ALG = <{disabled|enabled}>]
[RTP_predict_for_term_SIP_ALG =
<{disabled|enabled}>]
application The name of a CONN/NAT application helper.
Tip Use the command
:connection
applist
to obtain a list of CONN/NAT
application helpers.
REQUIRED
trace Enable or disable CONN/NAT application helper
traces.
The default is
enabled .
OPTIONAL
timeout A number between 0 and 32000 (seconds).
Represents the maximum timeout to keep
predicted child connections around. OPTIONAL
floating Enable / disabled floating port for IKE helper. OPTIONAL
childqos Used QOS label for the predicted child connections. OPTIONAL
tracelevel A number between 1 and 4.
Represents the SIP trace level.
Choose between:
>
1 : feature errors
>
2 : feature traces
>
3 : all errors
>
4 : all traces.
The default is 1 .
OPTIONAL
SIP_ALG SIP only: enable/disable traditional sip alg
behaviour OPTIONAL
RTP_predict_for_term_SIP_ALG Enable/disable RTP connection prediction for
terminated SIP OPTIONAL