THOMSON DFT-6108, User Manual, Page: 8 / 27

DFT-6108 Battery Analyzer
Instruction Manual
7
2.3.
Battery String Test
The Battery String Test interface is as follows, and its Test operation method is similar to that of single cell Test,
but the number of battery cells is increased, and before a String of batteries is tested, it can be tested continuously
without operating the interface. Click the touch screen Start Test button to take the Test.
2.3.1
Custom standard parameters
Click the "Unit" button on the right side of "Battery Voltage", pop up the custom parameter dialog window, set the
custom parameters, click "Save". After saving, you can see that the "V" of the button changes to "Custom x",
indicating that the customization was successful.
2.3.2
Standard parameter selection
Click the button on the right side of the "Battery Voltage" or "Standard Capacity" character to pop up the list of
standard parameters, select a parameter according to the needs, click again to set the parameters, and the main
interface updates the display. After clicking the "Save" button at the bottom of the "String Test" interface, the set
parameters will be saved permanently and the switch will not be lost again, and there is no need to set the
parameters repeatedly, which is convenient for the next test.