Installation and Operating Manual
Stratotimer ST3
DESCRIPTION AND OPERATION
Revision: 1.00
12/06/2020
31-20-01
Page 19
4.6 Setting the Elapsed Timer (ET), Elapsed Timer Down (ETD) and Elapsed Timer Down
(ETD) Alarm
The elapsed timer (ET) and elapsed timer down (ETD) are displayed in the bottom section
of the display screen (refer to Figure 8).
The elapsed timer (ET) can be displayed by turning the control button clockwise. Turn the
control button one increment counter-clockwise to change the display to elapsed timer down
(ETD).
To start / stop the elapsed timer (ET) press the ET push-button. The timer will continue to
count in the background when stopped.
To reset the elapsed timer (ET) to zero, long-press the ET push-button.
To set the elapsed timer (ET):
•
Display the elapsed timer (ET) by turning the control button clockwise (if necessary).
•
Short-press the control knob (all ET digits flashing).
•
Short-press the control knob (hour digits flashing). Turn the control knob to adjust.
•
Short-press the control knob (minute digits flashing). Turn the control knob to adjust.
•
Short-press the control knob (second digits flashing). Turn the control knob to adjust.
•
Short-press the control knob to exit setting mode.
•
Press the ET push-button and the timer will start counting UP.
The elapsed timer (ET) can also be set using the Main Menu (refer to Main Menu Options,
section 4.7).
To start / stop the elapsed timer down (ETD) press the ETD push-button. The timer will start
counting UP. The timer will continue to count in the background when stopped.
To reset the elapsed timer down (ETD) to zero, long-press the ETD push-button.
To set the elapsed timer down (ETD) alarm:
•
Display the elapsed timer down (ETD) (if necessary).
•
Short-press the control knob (all ETD digits flashing).
•
Short-press the control knob (hour digits flashing). Turn the control knob to adjust.
•
Short-press the control knob (minute digits flashing). Turn the control knob to adjust.
•
Short-press the control knob (second digits flashing). Turn the control knob to adjust.
•
Short-press the control knob to exit setting mode (amber digits displayed at the top
right of the bottom section of the display screen, to indicate alarm setting).
•
Short-press the ETD push-button and the timer will start counting DOWN.
The amber elapsed timer down (ETD) alarm indicator displays ‘00:00:00’ when the timer is
counting down, then displays ‘ALARM’ when the countdown is finished. The ETD digits
display ‘00:00:00’ in amber colour and an alarm audio is activated (if enabled in the settings).
A short-press of the ETD push-button stops the alarm audio (if enabled) and changes the
ETD alarm indicator back to ‘00:00:00’. The ETD colour remains amber.
Long-press the ETD push-button to exit the ETD alarm.
The elapsed timer down (ETD) alarm can also be set using the Main Menu (refer to Main
Menu Options, section 4.7).
Summary of Contents for STRATOTIMER ST3
Page 3: ......
