Installation and Operating Manual
Stratotimer ST3
31-20-01
Page 16
DESCRIPTION AND OPERATION
Revision: 1.00
12/06/2020
4.4 Setting the Date, UTC and LT
The date, the universal time coordinated (UTC) and the local time (LT) are displayed in the
top section of the display screen (refer to Figure 6).
The date can be displayed by turning the control knob counter-clockwise. Turn the control
knob one increment clockwise to display local time (LT), then another increment to display
universal time coordinated (UTC).
The date and the UTC are set automatically when the GPS input is set to ON (refer to Main
Menu Options, section 4.7).
To set the local time (LT), adjust the Time Zone setting in the main menu (refer to Main Menu
Options, section 4.7). All time zones are pre-set, including fractions of hours where
applicable.
Figure 6 – Top Section of Display Screen
Summary of Contents for STRATOTIMER ST3
Page 3: ......
