B
16-14 12-10
8-6
C
DE
Model No.
TM
ERG4005 COMFORT CRIMP
®
COMPRESSION TOOL WITH SHURE STAKE
®
MECHANISM
For Installing Non-Insulated Terminals,
Disconnects, and Splices 16-6 AWG (8 and 6 AWG Tubular Style Only)
IMPORTANT:
Read and understand all of the instructions and safety
information in this manual before operating or servicing this tool.
(16-14) B NEST
In the event the SHURE STAKE
®
mechanism must be released, please see Figure 5.
TA04530 B Page 1 of 2
1. Open handles fully.
2. Insert terminal into proper
nest as shown in Figure
2, with terminal barrel
seam facing indentor.
3. Close the handles slightly
to secure the terminal. Do
not deform the terminal.
4. Insert stripped wire.
5. Close handles until SHURE
STAKE
®
mechanism cycle
has been completed.
1.2
(12-10) C NEST
Figure 3
Figure 2
1.1
1.0
INSTRUCTIONS FOR USE
1. Open handles fully.
2. Splices requires two crimps.
Position splice in proper nest
as shown in Figure 3 with
window facing indentor.
3. Close handles slightly to
secure terminal. Do not
deform terminal.
4. Insert stripped wire.
5.
Close handles until
the SHURE STAKE
®
mechanism cycle has been
completed.
6.
Repeat steps 2-5 on
opposite end of splice.
For Use With Non-Insulated
Splices 16-6 AWG
WARNING
HANDLES ARE NON-INSULATING.
DO NOT CRIMP ON HOT ENERGIZED WIRES.
WARNING
KEEP ALL BODY PARTS AWAY FROM DIE NEST
DURING GAGING OR CRIMPING PROCEDURE.
Figure 1
(8-6) D-E NEST
For Use With Non-Insulated Terminals
and Disconnects, 16-6 AWG
