22-18
12-10
A
B
C
16-14
Model No.
TM
ERG4002 COMFORT CRIMP
®
COMPRESSION TOOL WITH SHURE STAKE
®
MECHANISM
For Installing Non-Insulated Terminals,
Disconnects, and Splices 22-10 AWG
IMPORTANT:
Read and understand all of the instructions and safety
information in this manual before operating or servicing this tool.
(16-14) B NEST
In the event the SHURE STAKE
®
mechanism must be released, please see Figure 5.
TA04538 B Page 1 of 2
1. Open handles fully.
2. Insert terminal into proper
nest as shown in Figure 2.
Barrel seam should face
indenter.
3. Close handles slightly to
secure terminal. Do not
deform terminal.
4. Insert stripped wire.
5. Close handles until
SHURE STAKE
®
mechanism cycle has
been completed.
For Use With Non-Insulated Terminals
and Disconnects 22-10 AWG
1.2
(22-18) A NEST
(12-10) C NEST
Figure 3
Figure 2
1.1
1.0
INSTRUCTIONS FOR USE
1. Open handles fully.
2. Splices require two crimps.
Position the splice in the
proper nest as shown in
Figure 3, with window
facing indenter.
3. Close handles slightly to
secure terminal. Do not
deform terminal.
4. Insert stripped wire
5.
Close handles until
the SHURE STAKE
®
mechanism cycle has
been completed.
6.
Repeat steps 2-4 on
opposite end of splice.
For Use With Non-Insulated Splices
22-10 AWG
WARNING
HANDLES ARE NON-INSULATING.
DO NOT CRIMP ON HOT ENERGIZED WIRES.
WARNING
KEEP ALL BODY PARTS AWAY FROM DIE NEST
DURING GAGING OR CRIMPING PROCEDURE.
Figure 1