thomann Varytec Hero Wash 712 Z RGBW Zoom, User Manual

Page: 36 / 56

Use the ‘Calibration’ menu to adjust the start parameters of the device.
Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows
‘Settings’ . Confirm the selection with [ENTER] and use [UP] or [DOWN] to select the submenu
‘Calibration’ .
Confirm the selection with [ENTER] . The device prompts you to enter a password. Press [UP] or
[DOWN] repeatedly until the display shows ‘018’ and confirm the selection with [ENTER] .
Use [UP] or [DOWN] to select the desired parameter you want to set.
Parameter Function
‘All To Origin’ Resets all parameters of the calibration to factory settings.
‘Pan’ Sets the home position of the rotation.
‘Tilt’ Sets the home position of the inclination movement.
‘Red ’ Sets the initial intensity for red.
‘Green’ Sets the initial intensity for green.
‘Blue’ Sets the initial intensity for blue.
Calibrating
Operating
36
Hero Wash 712 Z RGBW Zoom
moving head