Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]
DocID: 497002_25.11.2020
EN
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the manual
for future reference. If you pass the product on to others please include this manual.
SDI-HDMI 3G Converter Full-HD
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected
for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal firm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local
waste disposal facility.
Operating elements
q
Connection for power supply
w
Operating indicator lights up red when voltage is present
e
HDMI OUT
–
HDMI output
r
SDI IN
–
SDI input
t
SDI OUT
–
SDI loop output
Features
• Compact converter from SDI to HDMI signals up to 1080p | 60
• 3G-SDI connections
• Detects SD and HD formats automatically
• Input connectors: SDI
• Output connectors: HDMI
• Delivery including international power supply (5 V )
• Supported input resolutions: 525i, 625i, 720p @ 24 Hz, 720p @ 25 Hz, 720p @, 30 Hz,
720p @ 50 Hz, 720p @ 60 Hz, 1080i @ 50 Hz, 1080i @ 60Hz, 1080p @ 24 Hz,
1080p @ 25 Hz, 1080p @ 30 Hz, 1080p @ 50 Hz, 1080p @ 60 Hz
• Dimensions (W × H × D):
121 mm × 66 mm × 26 mm
• Weight: 0.25 kg
• Temperature range: 0 °C
-
40 °C, relative humidity 50 %, non-condensing
Safety instructions
Intended use
This device is used to convert SDI signals to HDMI format. Any other use or use under
other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damages resulting from
improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke! and choke! Never let children unattended
use electrical devices.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• in locations where the unit can become wet
• in locations with high levels of electrostatic or magnetic radiation
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or flammable cleaning agents.
Using the product
1. Connect the SDI output of the desired device to the SDI IN socket using a suita-
ble SDI cable.
2. Connect the input of a suitable HDMI device to the HDMI Out output.
3. Connect the device to a properly wired wall socket using the power supply
supplied. The device is immediately ready for use.
4. If the resolution of the input signal matches one of the resolutions supported
by the HDMI device connected to the output, the signal is output via the HDMI
output. To monitor the SDI input, you can connect the input of an SDI device to
the SDI Out output. The HDMI output does not transmit audio signals.
5. When you have finished using the device, disconnect the power supply from the
wall socket.
