7
Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2 Main menu
Press
[Mode]
to activate the main menu and select an operating mode. Use
[Setup]
to select
further options. Use
[Up]
and
[Down]
to change the respectively displayed value. When the dis‐
play shows the desired value, press
[MODE]
.
If you do not press any key for about 30 seconds, the display will be blanked. It will be reacti‐
vated to display the previously shown menu by pressing any button.
The set values are retained even when the device is disconnected from the mains power
supply.
Operating
Stage Quad LED Bundle RGBW / RGBWW
33
Summary of Contents for STAIRVILLE Stage Quad LED Bundle RGBW
