6
Operating
Connect the device to the power grid. Once the display is lit, the device is operational.
Automatic operation can only be activated when the unit is operating alone or as master in a
master / slave combination. This setting is only relevant if the device is not controlled via DMX
or ArtNet.
Press
[MENU]
and use the buttons
[UP]
and
[DOWN]
to select the
‘Auto Mode’
option. Confirm
with
[ENTER]
to open the ‘Auto Mode’ menu.
Here you can activate one of 30 available show programmes and set the programme speed.
Use the buttons
[UP]
and
[DOWN]
to select the desired option and confirm with
[ENTER]
. Adjust
the displayed value with
[UP]
and
[DOWN]
and press Enter to confirm each new setting.
[ENTER]
.
With
[MENU]
you return to the previous menu level.
Operating mode Auto
Operating
Pixel Panel 440 RGB MKII
25
Summary of Contents for Stairville Pixel Panel 440 RGB MKII
