thomann Stairville novaSpot 250 User Manual Download Page 24

Page: 24 / 80

Connect the device to the power grid. Turn it on with the main switch (15) to start the opera‐

tion. After a few seconds, the fans start to work, the head moves to the default positions for

rotation (pan) / inclination (tilt) and the display shows the device name. After a few more sec‐

onds, the device operates in the most recently used mode.

6.2

Main menu

Press

[ESC]

to activate the main menu. Use the jog wheel to choose a submenu. When the dis‐

play shows the desired submenu, press

[ENTER]

to open it. To quit the main menu, press

[ESC]

or wait for 10 seconds.
All previous settings are saved even if you disconnect the device from the power grid. To

restart with standard values use the

‘RESET’

function.

Operation

moving head

Summary of Contents for Stairville novaSpot 250

















































































Search results

Summary of Contents for Stairville novaSpot 250

Reviews:

Related manuals for Stairville novaSpot 250

Brands by name

Popular brands

thomann Stairville novaSpot 250, User Manual

Search results

Summary of Contents for Stairville novaSpot 250

Reviews:

Related manuals for Stairville novaSpot 250

Brands by name

Popular brands