7
Operating
7.1 Starting up the device
Connect the unit to the power grid to start the operation. After a few seconds, the display
shows a running reset. Then the unit is ready for use.
7.2 Main menu
Press
[M]
to activate the main menu and to select an operating mode. Use the arrow keys to
change the respectively indicated value. When the display shows the desired value, press
[OK]
.
If you don't press any button for about 1 minute, the unit returns to the previous mode. The
set values are retained even when the device is disconnected from the mains power.
Operating
LED floodlight
28
