4
Installation
Setup and assembly of the pads and pedals are described in detail in the enclosed assembly
guide. Finally, check that all connecting cables are correctly connected between the pads and
the drum module.
Connect the included power adapter to the
[DC 5 V]
input on the rear panel of the drum
module and then put the power plug into the power outlet.
Connect your stereo headphones to the
[PHONE]
output socket of the drum module.
CAUTION!
Possible hearing damage
Using headphones for a prolonged period and at high volume can cause hearing
damage.
Avoid using the device at high volume, especially when using headphones.
Setup, connecting pads and
pedals
Power adapter
DC 5V
USB
L/MONO
AUX
PHONE
Headphones
DC 5V
USB
L/MONO
AUX
PHONE
Installation
Rookie
11
E-Drum Module
