background image

Protecting the environment

For the packaging, environmentally friendly materials have been chosen that can be supplied

to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that

they are collected for recycling. Please follow the notes and markings on the packaging.

Batteries do contain some hazardous chemicals so they should not be thrown away with the

normal household waste. They should be returned to the manufacturer for disposal or recycled

elsewhere in accordance with your local regulations.
Dispose lithium batteries only in discharged condition. Remove lithium batteries from the

device before disposal. Protect used lithium batteries against potential short circuits, e.g. by

covering the poles with adhesive tape. Dispose the built-in lithium batteries together with the

device. Please check for an appropriate reception facility.

Disposal of the packaging mate‐

rial

Disposal of batteries

Protecting the environment

 

 

AirBorne Go

37

Summary of Contents for Harley Benton AirBorne Go









































Reviews: