5
3. Description
1. Optical lens with manual focus adjustment.
2. Hanging bracket with 2 knobs on both sides to fasten the unit and a
mounting hole to fix a mounting hook.
3. Mains input with IEC socket and integrated fuse holder, connect the
supplied mains cable here.
4. Lamp compartment, to be opened with two screws.
5. Cooling fan.
4. Operation
• Plugging into the mains power, the fixture starts running. The Water
Wave runs in automatic mode.
• The focus is adjustable and there’s an access door allowing easy
access to the illuminant.
5. Lamp installation or replacement
•
Always switch off the mains supply and never handle the lamp or the
illuminant when it is hot.
• Do not touch the bulb with bare hands. If this does happen, clean
the lamp with denatured alcohol and wipe with a lint free cloth before
installing.
• Pull the socket off the lamp. Do not pull the wires.
