thomann 498102, Owner'S Manual, Page: 18 / 36

5 Connections and operating elements
1 [STANDBY | CONDITION]
Slide switch to enable or disable the power saving mode.
If the speaker box is in power save mode and receives no signal for 60 minutes, it
switches to standby mode. As soon as the unit receives a signal, it switches auto‐
matically back to normal mode.
The CONDITION LED lights up continuously in normal operation and turns off when
the box - on activated power save mode - switches to standby mode.
2 [BASS BOOST | FLAT | 120Hz HPF]
Preset switch
[BASS BOOST] : Increasing the low frequencies.
[FLAT] : Even frequency response.
[120Hz HPF] : Attenuation of frequencies below 120 Hz (high pass filter).
Achat 110 MA MKII
Connections and operating elements
active speaker
18