thomann 296161, User Manual

Page: 32 / 52

ð
The display indicates that the receiver is being calibrated to a new frequency. After a
few seconds the display will return to the default state.
1.
Open the transmitter to uncover the infrared sensor.
2.
Press [ADS] . The IR display is flashing.
3. Within ten seconds, hold the infrared sensor of the transmitter close to the infrared inter‐
face of the receiver.
4. The IR display stops flashing when the synchronisation is successfully completed.
ð
After three seconds, the display returns to the default state.
Synchronising transmitter and
receiver
Operating
UHF wireless system
32