thomann 296161, User Manual

Page: 18 / 52

Attach the supplied antennas to the rear panel of the receiver. To improve transmission quality
and to adapt to the spatial conditions the antennas are rotatable and swivelling.
If the space for the direct mounting of the antennas on the unit is not sufficient, for example,
because of restricted space in the rack, you can use the optional coaxial cable to mount the
antennas separated from the unit. For larger configurations with up to four receivers, the
usage of the optional antenna distributor is appropriate.
Connect one of the audio outputs of the receiver to your mixing console or amplifier. Make
sure that only one of both output is used at a time. Otherwise, malfunction may occur.
4.3 Transmitter
Unscrew the lower housing part of the handheld microphone. Insert the batteries respecting
the correct polarity as indicated in the battery compartment. Close the battery compartment,
refit the lower housing part and tighten the screws, then turn the transmitter on.
Mounting antennas
Audio connection and starting
up
Inserting batteries into the
transmitter
Installation and starting up
UHF wireless system
18