background image

 

 

 

 

 

 

 

 

 

 

T H M

F R O N T A L E    

 

 

 

 

 

 

1 4  

LEGAL  

Materials defect liability 

We provide a 24-month warranty for all THM products which covers material and processing defects. 
During this period all products accepted to be defective are replaced at no cost to the user. The liability 
period starts at the time the relevant THM product was purchased. Liability does not extend to any 
kind of damage caused by accidents, modifications, negligence or improper handling and use. Liability 
shall expire if repair work or any other work on the THM product has been conducted by unauthorized 
person. The same shall also apply to any direct or indirect  

 
 

Warranty 

Minor  damage  to  your  THM  products  will  be  repaired  by  our  workshop  free  of  charge  even  after 
expiration of the 24-month liability period, provided that the work required does not exceed 0.5 hrs. 
The decision regarding whether or not a repair is to be carried out free of charge rests solely with us. 
 
If the damage has been self-inflicted, there is no entitlement to free repair work! In the event of self-
inflicted damage please send us the product concerned for inspection. We will then assess the level 
of work required and either perform the repair free of charge or send you a quotation. It is then up to 
you to decide whether or not to go ahead with the repair work. When returning a damaged product to 
us please ensure adequate postage costs are provided. Any shipment which is not prepaid will be 
rejected and returned to the sender! In the event of irreparable damage (e.g. caused by an accident) 
we will provide a 40% discount from the respective list price if you purchase a new THM product as a 
replacement.  The  relevant  claim  must  be  forwarded  directly  to  THM  Faserverbund-Technologie 
GmbH. The irreparable product shall then remain our property. 

 
 

 

 

 

Please contact us before returning a defective THM product! 

If products are returned without our previous agreement, the shipping costs incurred will be 

charged to your account!

 

 

INFO

 

 

Summary of Contents for THM FRONTALE

















Reviews: