Thitronik WiPro, Installation Manual

Page: 130 / 292

GB
WiPro „all in one“ Operating Instructions Page 4
1.9.2 Sequence of a gas alarm
If an assigned wireless gas alarm sends out an alarm signal because
a critical gas concentration has been reached, or a gas alarm which
is connected to the gas alarm input gives an alarm, this will signal
an alarm whether the system is armed or not.
The siren sounds for about 30 seconds with short interruptions.
The interior beeper sounds for about 30 seconds with short interruptions.
Depending on the vehicle type, the horn also sounds for about 30 seconds.
The vehicle indicators flash for about 180 seconds.
The status LED flashes for about 180 seconds.
If the cause of the alarm is not eliminated (critical gas concentration), the vehicle
indicators and the status LED will start to flash again until the gas concentration has
reached a non-critical level.
1.9.3 Interrupting a burglary alarm with the remote key fob
The “unlock” button interrupts the alarm or disarms the system.
It may be necessary to close the cab doors,
depending on the vehicle type.
The vehicle indicators flash once or twice (depending on the vehicle type),
the interior beeper sounds twice and the status LED stops flashing.
1.9.4 Interrupting a gas alarm with the remote key fob
The “unlock” button interrupts the alarm or disarms the system.
If the alarm is triggered with the system disarmed, the latter must be
armed first (see 1.1) in order to interrupt the alarm afterwards with “unlock”.
It may be necessary to close the cab doors, depending on the vehicle type.
The vehicle indicators flash once or twice (depending on the vehicle type),
the interior beeper sounds twice and the status LED stops flashing.
1.9.5 Interrupting a burglary alarm with the handheld transmitter
Any button interrupts the alarm or disarms the system.
It may be necessary to close the cab doors,
depending on the vehicle type.
The vehicle indicators flash twice, the interior beeper sounds twice
and the status LED stops flashing.




