P.T.O
.
www.tm-readers.com
Specifications subject to change without notice.
©2018 Third Millennium Systems Limited. All rights reserved.
All trademarks are the property of their respective owners.
100-02707-C
RX
The RX SERIES of OSDP readers provide a powerfully secure
and innovative design, offering a clean and stylish aesthetic
to any installation.
This document provides a general guidance for connecting and
fixing the RX SERIES of OSDP readers, and apply to all styles of
reader in this series.
To fix the reader ensure
the top-edge fixing lugs
engage correctly with the
recesses located at the top
of the backplate.
fixing and connection
Pull bottom edge of reader
MODULE away from the
backplate, and lift up.
1
Swing the bottom edge of the
module down and forward until
you feel the unit click shut.
5
Secure the reader module to
the backplate using the
M3x10mm screw as supplied.
6
Mount the reader BACKPLATE to
a flat surface using suitable
fixings having a diameter no
greater than 4mm (0.15 inch).
2
4
You may opt to use an
M3x10mm countersunk
security screw.
3
When the BACKPLATE has
been mounted, make wire
connections to the reader
MODULE
(see over)
and
your control panel.
Ensure you arrange the
cable such not to impair or
prevent the reader module
being properly secured to
the backplate.
i
Mounting this reader on (or near) metal may impair the read range of the unit.
reader styles