ThinkPad Helix 20CG, User Manual

Page: 81 / 120

3. Input the date or time by using the onscreen keyboard.
Config menu
If you need to change the configuration of your tablet, tap Config from the ThinkPad Tablet Setup program
main menu.
The following table lists the Config menu items.
Notes:
• Default values are in boldface .
• On each submenu, tap the default value to show selectable options and tap a desired option.
• Some items are displayed on the menu only if the tablet supports the corresponding features.
Table 1. Config menu items
Menu item Submenu item Selection Comments
UEFI IPv4 Network Stack • Off
• On
Enable or disable Network
Stack for PXE Boot.
UEFI IPv6 Network Stack • Off
• On
Enable or disable Network
Stack for PXE Boot.
Network
UEFI PXE Boot Priority • IPv6 First
• IPv4 First
Enable or disable Network
Stack for PXE Boot.
USB UEFI BIOS Support • Disabled
• Enabled
Enable or disable boot
support for USB storage
devices.
Always On USB • Disabled
• Enabled
If you select Enabled , the
external USB devices can
be charged through USB
connectors even when
the tablet is in low-power
mode (sleep, hibernate, or
power-off).
Note: If you select Enabled,
USB wake up function is
not supported on Always
On USB connector.
– Charge in Battery Mode • Disabled
• Enabled
If you select Enabled , the
external USB devices can
be charged through USB
connectors even when
system is in hibernation
or power-off mode and in
battery mode.
USB
USB 3.0 Mode • Disabled
• Enabled
• Auto
Set the USB 3.0 controller
mode for the ports shared
between USB 2.0 and
USB 3.0 controllers. If
you select
Auto , it enables
you to connect and route
appropriate USB 3.0 or
USB 2.0 connectors. If you
select
Enabled , it enables
Chapter 7
.
Advanced configuration
73