Think Outside Stowaway iPAQ 1940 iPAQ 1945 iPAQ 2210, Owner'S Manual

Page: 20 / 30

Stowaway Universal Bluetooth Keyboard Owner’s Manual Page 20
Frequently Asked Questions
Q: My keyboard and handheld are in-range and powered on, why won’t they
reconnect after a key press?
If the initial connection is set up in Unsecured mode and the Bluetooth Accessibility is
set to
Paired devices only,
the keyboard will not automatically reconnect. One of these
parameters will need to be changed. Either reestablish the connection in Secure mode,
see
Configuring the Keyboard to Your Pocket PC Device , or change the default settings
within the Bluetooth Settings under the Accessibility tab, see Reconnecting in
Unsecured Mode .
Q: What should I do when I type on the keyboard and nothing happens?
•
Check that Pocket PC device’s batteries are charged.
•
Verify that keyboard has sufficient power to operate.
•
Check to make sure that the keyboard software is installed properly according to
the instructions.
•
Check the
BT
tab of the
Keyboard Control Panel
to make sure the
Stowaway
BT keyboard
is enabled.
•
Check the
Config
tab of the
Keyboard Control Pane
l to make sure you’ve
selected the appropriate keyboard type. After tapping
Enable
, you should select
Bluetooth wireless keyboard
.
•
Use the Keyboard Help icon to launch the help.
Q: I tried to turn off the Bluetooth radio and it automatically turned back on, what
should I do?
The Stowaway BT keyboard must be disabled before the Bluetooth radio can be turned
off. See the
Disabling the Stowaway BT keyboard section for more information.
Q: What are the Serial and IR tabs of the Keyboard Control Panel for?
If you should ever select and setup the
Connected serial keyboard
or
Infrared
wireless keyboard
option on the
Config
tab of the
Keyboard Control Panel
, you will
see a
Serial
and/or
IR
tab added to the
Keyboard Control Panel
. Even if you change
back to
Bluetooth wireless keyboard
the
Serial
and/or
IR
tab will remain in the
Keyboard Control Panel
. Serial keyboards use a physical connection versus a
wireless connection to a Pocket PC device. Only users of Stowaway keyboards that use
a physical connection will use the
Serial
tab. Infrared keyboards use an infrared line of
sight connection to a Pocket PC device. Only users of
Stowaway Infrared Wireless
keyboards will use the
IR
Tab. Users of the
Stowaway BT keyboard
can ignore this
tab.