THINGET
XC3 Series Programmable Controller
Installation Guide
Functions
-
Dry and no dew - Insulate voltage: Up to DC 500V
-Fr from corrosive gases and dusts - Anti noise: 1000 V 1uS pulse per minute
-Don’t install he unit in areas subject to -Ambient temperature: 0~60 C
Liquid chemicals
-Ambient humidity: 5~95% (no dew)
Wiring
-COM1: RS232, connect with host machine, HMI program or debug
-Far from the high voltage, power supply or -COM2: RS232/RS485, connect with network or aptitude instrument
Cable with high current -COM3: BD board COM port RS232/RS485
-Never over voltage, make sure the polarity of -Installation:can use M3 screw to fix or install directly on
DIN46277
Power supply is correct -Grounding: The third type grounding (cant public ground with strong
power system)
Power Specification
-to avoid voltage decrease please use cable thicker than
2mm
- Even appear power cut within 10ms; PLC can still go
on working. But if long time power cut or abnormal
power decrease, PLC will stop working, output will
also appear OFF status, when recover power supply, the
PLC will auto to work.
- Connect the grounding terminals of basic units and
extend modules together, then ground.
Output Specification Input Specification
Terminal arrangement
1-Input Terminals 2- BD expansion
3-Input Label 4-COM port
5-COM port 6-COM port's cover board
7-Output label 8-Output terminals
9-Screws 10-Input indicate LED
11-Extension port
12-Programming status indicate LED
13-Output indicate LED
Rated Voltage
AC 100V~240V
Voltage allow bound
AC 90V~265V
Rated frequency
50/60 Hz
Allow momentary
power-cut time
Interrupt time<0.5AC
cycle,alternation>1sec
Impact current
Max 40A 5ms below/AC100V
Max 60A 5ms below/AC200V
Max power consumption 12W
Power for sensor use
24V DC max400mA
Transistor
Output
Relay output
Items
Below DC5~30V
Below
AC250V,DC30V
Interior power
Optical coupling
insulation
Mechanism
insulation
Circuit insulation
Indicate lamp LED
Action denote
0.8A
3A
Resistance
load
12W/DC24v
80VA
Inductive
load
1.5W/DC24V
100W
Lamp load
Max
Load
DC5V 2mA
Mini load
Below 0.2ms
10ms
OFF to
ON
Below 0.2ms
10ms
ON to
OFF
Response
time
DC24V
Input signal's voltage
7mA/DC24V
Input signal's current
Up to 4.5mA
Input on current
Law than 1.5mA
Input off current
About 10ms
Input response time
Contact input or
NPN
open collector
transistor
Input signal's format
Photo-electricity
coupling insulation
Circuit insulation
LED light when
input ON
Input action's display
