Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
T +39 0744 709071
F +39 0744 719833
www.thetfordmarine.com
59
R
ev.
V
01
Compact line | Installation and use manual | ENG
*To install the Chorus line (Gewiss) remove the fins from the
Frame B
(see the picture)
Cut out for Touch SFT Multifunction control panel:
4.6
Tank sensors
The sensor wiring of the control units, both in the standard one-level version (grey / black),
and in the two-level version for Touch (red / black and white / green) have a voltage of 7V.
You can connect:
•
Sensors with clean contact (float, with pressure switch or similar) which close the
contact between the two poles of the connector.
•
Electronic sensors with the following specifications:
o
Power 7V.
o
Electrical absorption 12,75 mA +/-1 mA when the sensor is un-activated and
22,75 mA +/- 1 mA when activated.
WARNING
: In any case, do not connect the sensor cable to any power source.
NOTE:
For the compatibility of the control units with other types of sensors or for the
use of connections other than those indicated in the wiring diagrams, contact the
