The Contractors Choice
thermOweld
®
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
thermOweld
®
Tel.
+1.800.558.1373
4102 South 74th East Ave
Tel. +1.918.627.5210
Tulsa, OK 74145 USA
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO REBAR
CRE-1
†
Place end of cable to center of tap
hole. Follow instructions on reverse
side for proper use of copper shim
stock or packing pad.
CRE-2
Butt end of cable against rebar. Follow instructions on
reverse side for proper use of copper shim stock.
CRE-3
†
Place cable and rebar into mold. Do not cut run cable.
Follow instructions on reverse side for proper use of copper
shim stock or packing pad.
CRE-4
†
Place cable and rebar into mold. Follow instructions on
reverse side for proper use of copper shim stock or packing
pad.
CRE-5
†
Place cable and rebar into mold. Do not cut run cable.
Follow instructions on reverse side for proper use of copper
shim stock or packing pad.
CRE-6
†
Butt cable against rebar. Follow instructions on reverse side
for proper use of copper shim stock or packing pad.
ECN 2422 REV "J" 1/5/11 34-5381-10
† Depending on weld type and rebar size, mold may go
around or be placed onto rebar.
