© Thermoteknix Systems Ltd 2020
14
6
Start monitoring
Setting the system up is straight forward. The supplied laptop has been pre-
configured with the FevIR Cam 2 monitoring software installed and your complete
system has been connected and tested in the factory before shipping to you. Once
you have decided where you want to perform the monitoring, you need to position
the FevIR Cam and Calibration Reference Source, connect the cables and start the
FevIR Cam software.
Installing (or re-installing) the software should not be necessary, but is described
later in this document.
The FevIR Cam head and laptop should be mounted on the FevIR Cam station
platform facing the approaching subjects and with the Calibration Reference Source
temperature reference within the field of view of the FevIR Cam.
