T9901085-1-3 UK
Page 32 of 38
USER INSTRUCTIONS FOR THE AIR CURTAIN
For Inlet Air Temperature Control
or
Room Air Temperature Control
To Switch On and Off:
Turn the air curtain ON by pressing the ON/OFF Button on the PAR-30MAA Remote
Controller and the air curtain fans will start within a few seconds. If a 3-Speed Fan
Switch is fitted adjust the fan speed to suit using the slider switch. As set up by the
Commissioning Technician the air curtain will operate in
Heat
mode, automatically
heating as required, with a target temperature of 24°C - all other buttons on the Remote
Controller are locked out.
Turn the air curtain OFF by pressing the ON/OFF Button on the PAR-30MAA Remote
Controller and the air curtain fans will stop within a few seconds. Do not turn off if
DEFROST
shows on the screen, wait until 3 minutes after defrost has finished.
If the PAR-30MAA Remote Controller is not locked the following functions operate:-
HEAT Mode:
Press the Mode Button on the Remote Controller until
Heat
appears on the display.
Adjust the target temperature using the
- or + Temp.
buttons between 22°C and 28°C
maximum. This is the normal mode of operation for the heat pump air curtain and it
should run in this set-up with no further adjustments, automatically heating as required.
Allow time for the air stream to heat up.
FAN Mode (Fan only - no heating or cooling):
Press the Mode Button on the Remote Controller until
Fan
appears on the display.
COOL Mode:
(only use if a condensate pump and drain system is fitted)
Press the Mode Button on the Remote Controller until
Cool
appears on the display.
Adjust the target temperature using the
- or + Temp.
buttons between 24°C and 19°C
(minimum recommended). Allow time for the air stream to cool. Do not necessarily use
the lowest target temperature possible as this uses more energy and carbon resources.
PAR-30MAA
Remote Controller
20°
C
26°
C
Inlet Air Temp. or
Room Air Temp.
Target
Temperature
ON/OFF Button
3-Speed Fan Switch (if fitted)
HIGH, MEDIUM, LOW
Mode
Temp. Fan
+
-
Fan Speed from
Remote Controller
(NOT AVAILABLE)
