24
To avoid the commands being changed by children, you may lock your
device's commands by pressing and holding
.
Select "Lock" and validate with .
Do the same to unlock the commands by selecting "Unlock" .
LOCKING COMMANDS
2 operating modes are proposed :
A
ctive
P
rog
-
The device follows the internal program defined for each day of the
week. The following ranges are defined when the device is switched
on :
Monday to Friday, comfort from 6am to 9am and from 6pm
to 9pm
Saturday and Sunday, comfort from 8am to 12am and from
6pm to 9pm. .
You may modify these ranges and define 3 Comfort temperature rang
-
es per day.
During these Comfort ranges, the temperature setpoint is adjusted
using or .
Outside the Comfort ranges, lowering the temperature is set in “Low-
er ECO T°” Prog mode
- The device follows your installation’s external programming orders
STOP and Frost (
see the manual for your programming unit
)..
i
nActive
P
rog
-
The device follows the setpoint temperature adjusted at all times
-
The device follows your installation’s external programming orders
(
see the manual for your programming unit
).
DESCRIPTION OF THE MODES
