REV-0
6.11
SECTION 6
© 2010 Thermoplan AG, Subject to change
Technical Manual
Text message
Reason / solution
ab.
Drain tub
• Excess water inside the chassis below the hydraulic unit has shorted out
the two pins located at the back of the chassis.
–
Check machine for leaks
• Eventually change hydraulic or mechanical module
ac.
Overtime error
• Coffee flow is too slow ( > 2 Min.)
–
Check grind setting and weight according to parameters
• Water flow blocked
–
Check brew valve on hydraulic module
• Eventually change hydraulic or mechanical module
User messages
