16
For more information about our products and how to contact us, please visit thermopatch.com
8. Maintenance
Make sure that the working cycle of the machine has ended before you start working on the machine.
Teflon cover:
The teflon film protecting the element must be cleaned regularly to prevent sticking of labels and patches
or the transfer of dirt to the garments. Clean the Teflon cover with a dry, clean cloth while the machine is
still warm. Repeat the process regularly as often as necessary. Damaged or soiled Teflon protection should
be replaced. These are available from your Thermopatch supplier.
Rubber cushion:
Clean the still warm rubber plate with a clean, lint-free cloth. Clean it as often as necessary. Damaged or
soiled rubber sheets must be replaced. These are available from your Thermopatch supplier.
Replacing the rubber cushion:
• Turn off the device and allow it to cool
• Make sure both the bottom metal plate and the rubber cushion are clean and free of grease
• Apply SPA-0892330 silicone adhesive (with a glue comb) to the metal plate and place the rubber
plate immediately with no air bubbles
• Allow to dry overnight at room temperature under light pressure without heating.
ATTENTION!
Remove the plug from the wall socket BEFORE starting maintenance or repairs
Open fuse box
and replace
fuses here
