W W W.
If you have any questions or queries regarding this product, or any other products or services
you can view our complete range online, WWW.THERMOGROUPUK.COM
5259ESG
EASY SETUP GUIDE: TOUCHSCREEN THERMOSTAT 5259 (5257, 5255)
1
Step 1
Set time & date
Step 2
Advanced setup
Step 3
Manual mode
Step 4
Heating schedule
1.
Tap the “power” button to switch unit on.
2.
The backlight will fade after around 10 seconds.
3.
Tap the “Clock” button to switch it back on at any point.
4.
Press and hold the “Clock” button for around 7 seconds or until the minutes
begin to flash.
5.
Use the “Up” and “Down” arrows to select the correct minute.
6.
Tap the “Clock” button to switch to hour and use “Up” and “Down” to select the
correct hour.
7.
Tap the “Clock” button again to edit the day.
8.
Use the “Up” and “Down” arrows to select the correct day number:
1 = Mon 7 = Sun.
9.
Tap the “Clock” button to save your time and date settings.
1.
To access advanced settings switch the unit off by tapping the “Power” button.
2.
Then press and hold both the “Power” and “Menu” button.
3.
Tap the “Menu” button to switch to Sensor mode (2SEN) and set to OUT
4.
Tap “Menu” x3 to switch to Frost Protection Mode (SLrP).
5.
Set this to “On” using the “Up/Down” arrows.
6.
Tap the “Menu” button to set your program days.
7.
Tap “Up/Down” to set the program days.
8.
Program options include:
6 days same & 1 separate day
7 days same
5 days & weekend (recommended)
Program off
9.
Tap the “Menu” button and switch off to save your settings.
Step 1
Set the correct time & date
Contents
Step 2
Advanced settings
Touchscreen Thermostat:
Easy Setup Guide
Icon key:
- Up
- Manual control mode
- Period 1
- Period 4
- Down
- Program mode indicator
- Period 2
- Period 5
- Heating on
- Power
- Menu button
- Period 3
- Period 6
- Clock Button
Step 3
Manual mode
1.
You can switch between Manual and Schedule by tapping “Menu”.
2.
When in Manual mode, set a target temperature manually using the “Up/Down” arrows.
3.
When the target temperature is set above the ambient temp, you will see the HEAT symbol (flame) below the
target temp.
