Models TGO-80W, 150W, 240W Glassware Drying Oven Manual
26-1-16
3
These drying ovens will operate from a standard 240 volt, 50Hz, 10 amp general
purpose power outlet.
LOCATION & INSTALLATION:
Location:
Place the oven in a well ventilated area on a firm level surface. Please note that all
models will generate some heat as a normal part of operation and some of the surfaces
will be hot to touch.
The exhaust vent at the rear of the oven has a cover over it so that the vent cannot
be placed up against a wall. When being used for drying purposes there will be warm
moist air being discharged from this vent, please take this into account when determining a
location for the oven.
The TGO-80W and the TGO-150W are suitable for bench mounting, but the larger
TGO-240W is meant to be free standing.
Model:
TGO-80W
TGO-150W
TGO-240W
Internal Dimensions:
500 x 400 x 400 (WDH)
600 x 500 x 500 (WDH)
600 x 500 x 800 (WDH)
External Dimensions
620 x 520 x 620 (WDH)
720 x 620 x 720 (WDH
720 x 620 x 1020 (WDH
Capacity
80 litres
150 litres
240 litres
No of shelves
2
2
3
Electrical rating
240 volts, 7 amps.
240 volts, 8.5 amps.
240 volts, 10 amps.
Do not place anything on top of the oven, in particular do not block off the
ventilation slots that are used to keep the fan motor cool.
Mains connection:
These cabinets are suitable for connection to a standard 240 volt, 50Hz, supply. A
dedicated outlet should be used for the supply, do not use power boards or the like. A 3-
pin moulded plug is fitted as standard to the mains lead.
CONTROL PANEL:
1:
Layout:
