Manual NOVOS und thanos EVO
Seite
20
Thermokon Sensortechnik GmbH
4.4.3
Configuration menu
NOVOS 7
NOVOS Touch/thanos EVO
Konfigurationsdatenblock „Beschattung“
▪
Anzahl der Beschattungskreise
▫
Datenadresse 1601
0-8
▪
Darstellung der Beschattungskreise
▫
Datenadresse 1602
Listendarstellung = 0
Raumplan-Darstellung = 1
Beide Darstellungen = 2
▪
Auswahl des Icons für Beschattung
▫
Beschattung 1; Datenadresse 1615
▫
Beschattung 2, Datenadresse 1636
▫
Beschattung 3; Datenadresse 1657
▫
Beschattung 4; Datenadresse 1678
▫
Beschattung 5; Datenadresse 1699
▫
Beschattung 6; Datenadresse 1720
▫
Beschattung 7; Datenadresse 1741
▫
Beschattung 8; Datenadresse 1762
0 = Jalousie
1 = Jalousie Gruppe
2 = Rollladen
3 = Rollladen Gruppe
The configuration menu offers the possibility to
change the interface parameters, date and time as
well as offsets of the measured values.
Additional information such as hardware or software
versions can also be called up through the
configuration menu.
Furthermore, the configuration menu can be hidden
automatically after a pre-defined time after
switching on the power supply. Once the
configuration menu is hidden, it is only available
again after a power reset for the predefined time.
The password for NOVOS 7 / Touch and thanos EVO
is “2030” and is set initially as a default factory
setting. It can be changed at any time via NOVOSapp
or BUS.
Configuration data block „General“
▪
Automatic hiding of the configuration menu
▫
Data address 1123
0 = Off
1 -60 = after 1 till 60 minutes
▪
Code-lock
▫
Data address 1124
0000 - 9999
(Factory default 2030)
▪
Factory setting of the interface setting
▫
Address 1
▫
38400 Bd
▫
Parity Even
▫
1 Stop bit