PELLING
28
5.7
Burning of wood
Pelling boiler is constructed that beside pellet can burn wood also. Inserting of grate
inside of boiler is very easy as well as changing of fuel type on the control unit.
Wood combustion is an alternative option, and should not be longer than
30days. For flawless work and high efficiency during wood burning, it is
recommended to install a Buffer tank. Only dry wood can be fired, not raw or
coal. The boiler must be connected to the chimney.
1.
First it is necessary to remove the metal shelf above the burning chamber and
the turbulators from heat pipe exchanger.
2.
Then, remove the combustion pot and put the grate on the planned carrier.
3.
After inserted grate, on regulation change mode to
WOOD
. This is done on
following way:
Summary of Contents for Pelling 100
