ThermoFisher Scientific Vanquish VH-D10, Operating Manual

Page: 154 / 196

7 • Maintenance and Service
Page 154 Vanquish Diode Array Detectors (VH-D10) Operating Manual
7.14.2 Transporting the Detector to a New Location
To transport the detector to a new location, follow these steps:
1. Observe the notes for handling and lifting the detector safely.
2. Transport the detector to the new location.
3. Install and set up the detector in the system stack. Follow the
instructions on mounting the system stack in the Vanquish System
Operating Manual
.
4. Set up the detector:
a) To connect the detector and to set up flow connections, follow
the instructions in the
Installation chapter
in this operating
manual.
b) To prepare the detector for first-time operation, follow the
instructions in the
Preparing the Detector for Operation section
in this operating manual.
5. Before starting an analysis, let the detector equilibrate and be sure
that it is ready for operation.