ThermoFisher Scientific Vanquish VC-D50, Operating Manual

Page: 168 / 188

9 • Specifications
Page 168 Fluorescence Detectors (VC-D50, VC-D51, VF-D50, VF-D51)
Operating Manual
Type Specification
Safety features Power-up check of optics and motors (initialization)
Monitoring of cooling fans and electronics
Leak detection and safe leak handling
Flow cell identification and documentation of the flow cell type
Good Laboratory Practice (GLP)
features All system parameters are logged in the Chromeleon Audit Trail.
Functions for monitoring the operating and usage conditions of the device.
This includes monitoring of lamp age, PMT workload, grating and filter
movements, and service and qualification intervals via the Chromeleon
software.
9.1.2 Flow Cells
The flow cell performances are specified as follows:
Type Standard Flow Cell Micro Flow Cell
Flow cell volume 8 µL 2 µL
Volume heat
exchanger and/or
inlet capillary 6.3 µL 3.3 µL
Pressure limit 2 MPa 4 MPa
Recommendations
for use Higher sensitivity and optimum signal-to-
noise ratio, for columns with > 2.1 mm ID Best resolution in UHPLC, for columns
with ≤ 2.1 mm ID
Temperature
control 15 °C above ambient to 50 °C absolute
Biocompatibility yes
Materials in the
flow path Fused silica, MP35N, PEEK, titanium, fluoropolymers
NOTICE For information about the chemical resistance of materials refer to the
technical literature.
Solvent and additive
information See Solvent and Additive Information ( } page 27) .
Maximum allowed solvent temperature: 80°C.
Good Laboratory
Practice (GLP)
features Identification chip