Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
51
Chapter 3
|
Touchscreen Console setup
Figure 3.21. PCD Module Configuration screen.
Required fields
Units
Set the units you would like displayed on the PCD module—mbar or
psi. By default, the units are set to PSI.
1. To change the units, touch the
Units
field.
2. Touch PSI or mbar to use that unit of measurement. Once you make
a selection, the BPC Module Configuration screen will reappear and
your changes will be reflected in the
Units
field.
Optional fields
High and Low alarms
Choose to enable or disable High and/or Low alarms. These alarms
provide a visual alert on the display when conditions are outside of
specified operating parameters.
1. If you would like to set High/Low alarms for air pressure, touch the
High and Low alarms
field. The screen that appears has separate
sections for both High and Low alarms (Figure 3.22).
