ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 113 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 103
Operation |
Chapter 6
If the password is accepted and the unit is able to join the network, the following pop-up
window is displayed:
Figure 102 Network Connection Message
Tapping the “OK” button or the X icon in the top right corner will close the pop-up window
and the display returns to the “Connectivity” screen. The “Connectivity” screen displays
the WiFi network name in the WiFi button.
When unsuccessful, an error message appears on the screen of the device, detailing the
nature of the problem. Use this information for troubleshooting the connection problem,
then try again.
Joining a Different Type of WiFi Network
If the network you would like to join is not displayed in the wheel-picker list, you may
choose “Join Other” and tap the “Next” at the bottom of the screen. If the network cannot
be seen, this may also be due to the signal strength being too weak:
Figure 103 “WiFi” Screen - Join Other
Connected
This unit is now connected to the
ACME network.
OK
Thermo Fisher BSC
11:42 AM I 08/10/2018
WiFi
Select your
wireless
network
Refresh List Next
Join Other