ThermoFisher Scientific Applied Biosystems Veriti 4375305, User Manual, Page: 19 / 106

Creating a shortcut to a run method
You can add buttons to the Main Menu screen that allow you to go directly to the Edit Run Method
screen for a particular run method. When login is required, each user can configure his or her own
shortcut buttons; otherwise the shortcut buttons are displayed for all instrument users.
Note:
You can also create shortcuts to instrument functions (see “Configuring main menu shortcuts to
functions” on page 40 ).
1.
Select one or more methods in the Browse Run Methods screen, then select (Create Method
Shortcut) .
2.
In the message box that appears, select OK.
The selected run methods appear as buttons in the Main Menu screen. The name of the method is
followed by the name, in parentheses, of the folder where the method is stored.
Note: Run method names longer than twelve characters will appear truncated on the shortcut
button.
To delete a shortcut to a run method, see “Configuring main menu shortcuts to functions” on page 40 .
Backing up run methods and other settings
You can back up the instrument run methods and other settings to a USB drive. All run methods,
folders, user information, and other instrument settings are saved.
Note: If your instrument requires login, you must have Administrator level permissions to back up run
methods and instrument settings.
1.
Insert the USB drive into the USB port on the front of the instrument.
2.
Log in as a user with Administrator access.
3.
In the Main Menu screen, select Settings Menu , then Admin Menu .
Chapter 1
System overview
About run methods
1
Veriti ™ Thermal Cycler User Guide
19